A syringe pump is a small, positive-displacement pump used to gradually transfer precise volumes of fluid. Chemyx Fusion Series syringe pumps are all driven via a stepper motor. A lead screw, threaded through a pusher block, precisely turns the pump’s stepper motor. This causes the pusher block to move. specification • Pump status: o GREEN for infusion in progress, o ORANGE for Low and Medium priority, o RED for High priority – Visibility at 4 meters minimum. • All alarms are expressed by means of light indicators, written words,pictograms and sound beeps. • Syringes installation control: Syringe barrel clasp check, plunger head detection, anti-siphon system check, flange detection. • Infusion control: Occlusion pressure pre-alarm, occlusion pressure alarm, end of infusion pre-alarm, end of infusion alarm, volume limit pre-alarm, volume limit alarm, hard and soft flow rate limits, start infusion at pause end. • Device control: Disengaged driving mechanism alarm, low battery pre-alarm, discharged battery alarm, battery capacity display in hours and minutes, unconfirmed programming, technical malfunction alarm (auto-test, rotation), drive system advance check, watchdog check, communication connection failure, plug-head disengagement, auto-lock/lock code (on Keypad). dimension • Dimensions: 135 X 345 X 170 mm (H/W/D) • Flow Rate Range 0.1 – 1200 mL/h, depending on the syringe capacity. • Bolus Direct bolus Rate 50 – 1200 mL/h (50 mL/h increment). • End infusion KVO adjustable from 0.1 to 5 mL/h, continuous infusion or stop.(V/T & VL) • Pause Programmable from 1 minute to 24 hours, increments from minute to minute. • Datalog event 1500 data log events in real-time.